George H. Atherton Papers, 1937-1979
Table of Contents
Overview of the Collection
- Creator
- Atherton, George H. (George Harry), 1920-1987.
- Title
- George H. Atherton Papers
- Dates
- 1937-1979 (inclusive)19371979
1970-1979 (bulk)19701979 - Quantity
- 1.8 cubic feet, including 16 photos, (2 boxes)
- Collection Number
- MSS Atherton
- Summary
- The George H. Atherton Papers consist of materials created or assembled by Atherton in his work as a forest products researcher and teacher. Atherton was a research engineer with the Oregon Forest Products Laboratory from 1950 to 1961, when he became a Forest Products professor at Oregon State University.
- Repository
-
Oregon State University Libraries, Special Collections and Archives Research Center
Special Collections and Archives Research Center
121 The Valley Library
Oregon State University
Corvallis OR
97331-4501
Telephone: 5417372075
Fax: 5417378674
scarc@oregonstate.edu - Access Restrictions
-
Collection is open for research.
- Languages
- English
Biographical Note
George H. Atherton was a faculty member in Forest Products at Oregon State University from 1961 until his retirement in 1982; he was honored by the forestry students as an outstanding teacher with the Aufderheide Award. Atherton earned his BS (1950) and MS (1966) degrees in Mechanical Engineering from Oregon State. From 1950 until 1961, Atherton was a research engineer with the Oregon Forest Products Laboratory; he was in charge of milling and engineering for the laboratory in 1954-1961. His research specialties included heat transfer and timber mechanics.
As a Professor of Forest Products he taught upper-level courses, including Forest Products 321 and 422 on the mechanical properties of wood and wood products; supervised graduate students; participated in various short courses and seminars concerning veneer and lumber drying, as well as timber construction; and conducted research projects.
Content Description
The George H. Atherton Papers consist of materials created or assembled by Atherton in his work as a forest products researcher and teacher. These include student projects and reference files.
The student projects are papers written by students in Atherton's mechanical properties course (Forest Products 422) during the 1970s. A subject index and list of the papers is included with the collection. The papers represent substantive research projects and address the mechanical properties of solid wood, veneer, wood composites, laminates, and other wood products; interactions and effects between wood products and various fasteners, such as nails, staples, and screws; paper manufacture, include the effect of recycle pulp; and the effects of moisture, drying temperature, and chemical treatments on the mechanical properties of wood products.
The reference files pertain to Atherton's research on heat transfer and timber mechanics and include reports, reprints, and publications; correspondence; research data; testing equipment manuals; and related documentation.
Use of the Collection
Preferred Citation
George H. Atherton Papers, Oregon State University Special Collections & Archives Research Center, Corvallis, Oregon.
Administrative Information
Arrangement
The George H. Atherton Papers are arranged in 2 series: I. Student Reports, 1970-1979 and II. Reference Materials, 1937-1976.
Processing Note
Evaluations and grades of student papers have been redacted.
Acquisition Information
The papers were transferred by the Forest Products Department to the Archives in 1999.
Related Materials
A biographical file for Atherton is available in the College of Forestry Records (RG 139). The Forest Products Department Records (RG 003) include extensive documentation of forest products research and teaching at Oregon State. The Archives' collections include the papers of several other forest products faculty, including S.E. Corder, Leif Espenas, Douglas W. Glennie, Robert. D. Graham, and James W. Johnson. The August Rauch Collection documents Rauch's wood products research.
Detailed Description of the Collection
-
Series I: Student Reports, 1970-1979
Contains student project reports from 1970-1979 from the Department of Forest Products at Oregon State University taught by George Atherton. Series is arranged alphabetically by author names and contains a bibliography and index for class reports.
-
Description: Bibliography – Student Reports and Index through 1979
Cross-reference index for class reports.
Dates: 1979Container: Box 1 -
Description: Mark R. Arslan. An Evaluation of the Relationship between Torsional Modules of Rigidity and Modulus of Rupture in Bending for Douglas-Fir Dimension LumberDates: 1978Container: Box 1
-
Description: Jon C. Atherton. Effect of Species, Load and Load Cycling on Slip in Nailed Wood JointsDates: 1979Container: Box 1
-
Description: Michael J. Bauman. Evaluation of Euler’s Formula for Predicting Critical Buckling Loads in Wood ColumnsDates: 1978Container: Box 1
-
Description: Kurt Barats. Direct Withdrawal Resistance of Screws in Medium Density FiberboardDates: 1978Container: Box 1
-
Description: Jack W. Berka. The Effect of the Span-Depth Ratio on the Modulus of Elasticity and Modulus of Rigidity for Douglas-fir Box BeamsDates: 1976Container: Box 1
-
Description: Bruce W. Bevard. Study of Density Variation in Hardboard Using X-RadiationDates: 1970Container: Box 1
-
Description: Philip R. Biencourt. Effect of Size and Location of Knots on the Bending Properties of Douglas-fir StudsDates: 1979Container: Box 1
-
Description: John Boothe. The Effect of Fumigants at Three Temperatures on the Stiffness and Bending Strength of Douglas-fir HeartwoodDates: 1976Container: Box 1
-
Description: Wayne E. Borgersen. The Effect of Time on Interlayer Slip of Plywood by Two-by Four and Fiberboard to Two-by-Four Nailed JointsDates: 1976Container: Box 1
-
Description: Stephen D. Browning. Prediction of Strength and Stiffness of a Glued Laminated Beam from Properties of Cores Taken From the Laminations of the BeamDates: 1975Container: Box 1
-
Description: Nicholas E. Bush. Direct and Lateral Resistance of Power-Driven Nails and Staples in Clear Douglas-firDates: 1971Container: Box 1
-
Description: Christopher S. Carter. Determination of Moduli of Elasticity, Rupture, and Rigidity for Insulation BoardDates: 1974Container: Box 1
-
Description: John R. Cheeseman. Effect of Glueline Thickness on Shear and Tensile Properties of a Wood CompositeDates: 1975Container: Box 1
-
Description: Jon Chrysler. Is there a Difference in Bending Strength between Heartwood and Sapwood of Douglas-fir Veneer?Dates: 1970Container: Box 1
-
Description: Michael W. Clausen, Effect of Specimen Depth on Modulus of Elasticity in Clear Douglas-firDates: 1973Container: Box 1
-
Description: Robert J. Colella. Evaluation of the Slip Moduli of Three Plywood-To-Wall Stud Fastening SystemsDates: 1973Container: Box 1
-
Description: Joseph Coussens, Effects of Grade and Thickness Variations in Douglas-Fir Plywood on Modulus of Rupture, Modulus of Elasticity and Shear StrengthDates: 1976Container: Box 1
-
Description: Douglas L. Crandall. The Screw-Holding Strength of ParticleboardDates: 1977Container: Box 1
-
Description: Gary A. Deeke. Accuracy of Euler's Formula in the Prediction of Critical Load on Axially-Loaded Slender ColumnsDates: 1970Container: Box 1
-
Description: Greg Dickson. Specific Gravity, Percent Summerwood, and Ring Count, as Predictors of Modulus of Elasticity and Modulus of RuptureDates: 1974Container: Box 1
-
Description: Edward C. Dierling. The Effect of Fomes Pini on the Bending Strength and Stiffness of Clear Douglas-firDates: 1970Container: Box 1
-
Description: Mark C Dohrmann. Predicting Residual Strength and Stiffness of a Large Glued-Laminated Beam from Small Specimens Sawn from the BeamDates: 1975Container: Box 1
-
Description: Michael B. Donivan. Strength of Furniture Joint vs. Furniture Joint DesignDates: 1975Container: Box 1
-
Description: Tom Eby. The Effect of Density, Thickness and Board Location on Bending Strength, Stiffness and Internal Bond Strength of Commercially Produced ParticleboardDates: 1977Container: Box 1
-
Description: Jon E. Edens. The Effects of Nail Spacing, Nailing Angle, and Joints on Interlayer Slip, in Plywood Sheating—Two-By-Four ConstructionDates: 1975Container: Box 1
-
Description: Keith Ehrensing. The Effect of Screw Size on Direct Screw Withdrawal Strength of ParticleboardDates: 1970Container: Box 1
-
Description: Bruce H. Erickson. Comparative Tests of Modulus of Elasticity and Modulus of Rupture Between Clear Wood Sapwood Produced Beyond an Occluded Knot and Clear Wood Sapwood Developed Between Nodes of a 27 Year Old Douglas-firDates: 1970Container: Box 1
-
Description: Thomas C. Ewen. A Comparison of the Modulus of Rupture, Modulus of Elasticity, Plywood Glue Line Shear Strength, and Percent Wood Failure on One Half Inch 3-Ply, 4-Ply, and 5-Ply PlywoodsDates: 1971Container: Box 1
-
Description: Virgilio A. Fernandez. Effect of Fire-Retardant Treatments on the Strength and Stiffness of Small Douglas-fir BeamsDates: undatedContainer: Box 1
-
Description: David F. Flaming. Effects of Specific Gravity, Depth of Penetration, and Grain Direction on the Direct Withdrawal Resistance of NailsDates: 1976Container: Box 1
-
Description: Charles Geissel. Effect of Depth in Small Clear Beams on Modulus of Rupture, Modulus of Elasticity and Modulus of RigidityDates: 1974Container: Box 1
-
Description: Mark A. Gillies. Work Done in FP 422 Mechanical Properties IIDates: 1978Container: Box 1
-
Description: Dennis M. Golik. Dynamic Modulus of Elasticity Measured by Flexural Vibration as a Cantilever as a Predictor of Modulus of Rupture for Clear Western HemlockDates: 1972Container: Box 1
-
Description: Stephen W. Griffith. Effect of Head Speed, Span, and Thickness on Strength and Stiffness of HardboardDates: 1979Container: Box 1
-
Description: Mark Grube. The Comparison of the Strength Properties of Three Construction PanelsDates: 1979Container: Box 1
-
Description: David Haas. Effect of Use of Recycled Pulp on the Properties of Bleached Douglas-fir Kraft PaperDates: 1979Container: Box 1
-
Description: Jim Hallstrom. Development of a Non-Destructive Testing Method for Unseasoned Douglas-fir Scaffold PlankDates: 1973Container: Box 1
-
Description: Kerry A. Hart. A Comparison of MOR and MOE of Dry Douglas-fir 2 x 4 Studs from Peeler Cores and Small Logs with Studs from the Outer Part of Larger Logs
Includes 2 color prints
Dates: undatedContainer: Box 1 -
Description: John H. Hatton. Effect of Long Term Water Soak on Modulus of Rupture and Modulus of Elasticity in Particleboard UnderlaymentDates: 1970Container: Box 1
-
Description: Guy G. Helsing. The Effect of Three Fumigants on Stiffness and Strength of Douglas-fir HeartwoodDates: 1973Container: Box 1
-
Description: Jim Herold. Direct Withdrawal Resistance of 1¼” Helically Grooved Nails Compared with 1¼” Flathead Screws in Douglas-Fir and White OakDates: 1973Container: Box 1
-
Description: Mark Hollaender. Comparing Nails and Screws and Investigating the Effect of Load Levels and Load Cycling on Interlayer SlipDates: 1979Container: Box 1
-
Description: Robert K. Horton. The Effect of Beating and Sheet Weight on the Strength Properties of Kraft PaperDates: 1970Container: Box 1
-
Description: Bill Huff. Modulus of Elasticity Measured by Static and Dynamic Methods as Non-destructive Predictors of Modulus of RuptureDates: 1976Container: Box 1
-
Description: Bob Inwards. The Effect of Vapam (Sodium Methyl Dithiocarbamate) on the Stiffness and Bending Strength of Douglas-fir HeartwoodDates: 1975Container: Box 1
-
Description: Gotzsche-Larsen Jens. Determination of Modulus of Rigidity and True Modulus of Elasticity for Three Sizes of Douglas-fir BeamsDates: 1976Container: Box 1
-
Description: John A. Johnson. Effect of Machine Direction on Certain Properties of Particleboard UnderlaymentDates: 1976Container: Box 1
-
Description: David E. Jordan. The Effect of Load Application Direction with Respect to Grain Angle on the Shear Strength of Clear Douglas-firDates: 1971Container: Box 1
-
Description: Stephen S. Kelly. The Modulus of Elasticity of Particleboard as Effected by Small Span/Depth RatiosDates: 1977Container: Box 1
-
Description: Nancy Klink. The Effects of Thickness, Frequency, and Sound Pressure Level on the Sound Transmission Loss of Three Materials Commonly Used in Building ConstructionDates: 1978Container: Box 1
-
Description: Chuck L. Kroeger. Comparison of Utility-Grade Englemann Spruce Two-By-Four Stud Strength Ratios Determined by Three Different MethodsDates: 1973Container: Box 1
-
Description: David G. Langland. Effect of Beating Time, Basis Weight, and Test Span on Some Paper PropertiesDates: 1977Container: Box 1
-
Description: Daniel J. Lewis. The Mechanical Properties of Hardboard as Affected by OrzanDates: 1977Container: Box 1
-
Description: Gray S. Likins. Moduli of Elasticity Determined by Three Methods as a Predictor of Modulus of Rupture for Clear Douglas-fir StudsDates: 1977Container: Box 1
-
Description: Jim Lyman. Variation of Modu1us of Elasticity in ½" Plywood With Respect to Specimen SizeDates: 1976Container: Box 1
-
Description: Edward J. McLaughlin Jr. Special Term Report on Activities in Mechanical Properties Tim Marcy, Moisture Content and How It Effects the Strength and Stiffness of Wood in Bending
Includes 4 b/w prints
Dates: 1974Container: Box 1 -
Description: Norman Marrs. Effect of Fiberglass Lamination on the Strength of Small Clear Wood SpecimensDates: 1970Container: Box 1
-
Description: Greg W. Miller. Strength and Stiffness of Composite I Beams with Structural Particleboard Webs and Solid Wood FlangesDates: 1975Container: Box 1
-
Description: Arjen A. Morks. Effects of Accelerated Aging Methods on the Properties of PlywoodDates: 1978Container: Box 1
-
Description: Michael E. Murphy. The Effect of Preservative Treatments on the Withdrawal Resistance of Three Nail Types in Douglas-firDates: 1978Container: Box 1
-
Description: Scott Nebinger. Tension Strength and Stiffness of Nailed or Glued Truss Plate End-Joints
Includes 2 b/w prints
Dates: 1977Container: Box 1 -
Description: Bradley J. Nutting. Comparison of Bending Properties of Peeler Core-Cut and Log-Cut StudsDates: 1979Container: Box 1
-
Description: Jerry Obendorf. Creep and Recovery in Particleboard as Affected by Relative Humidity
Includes 5 b/w prints
Dates: 1970Container: Box 1 -
Description: Edward W. Olson. Effect of Redrying on the Bending Properties of VeneerDates: 1979Container: Box 1
-
Description: Gregg T. Perry. Effect of Moisture Contents Below Fiber Saturation Point on Modulus of Rupture and Modulus of Elasticity in Two Specific Gravity Classes of Flat-Grain Western HemlockDates: 1971Container: Box 1
-
Description: Larry Phillips. Accuracy of Eulers Formula in the Prediction of Critical Load on Axially Loaded Slender ColumnsDates: 1971Container: Box 1
-
Description: James L. Ployhar. The Effect of High Temperature on the Strength of Two Northwest SoftwoodsDates: 1979Container: Box 1
-
Description: Mark Powers. A Study of the Strength Properties of Hole-Incised Dimension LumberDates: 1979Container: Box 1
-
Description: Jerry Premo. The Effect of Moisture Content on Direct Withdrawal of Common Wire Nails in Western HemlockDates: 1971Container: Box 1
-
Description: Rod L. Remington. The Effect of Finger Joints on the Tensile Strength of Douglas-fir 2” x 4”Dates: 1970Container: Box 1
-
Description: Stephen Renn. The Effects of Nail Size, Plywood Thickness, and Edge Distance on Nail Strength and Joint Slip of Plywood-Solid Wood JointsDates: 1976Container: Box 1
-
Description: Johan Rering. Flexural Properties of a Particleboard Wood-Veneer CompositeDates: 1977Container: Box 1
-
Description: Eric R. Schild. The Strength of Nail, Screw, and Glue Joints Using Ponderosa Pine, Douglas-fir Plywood, and ParticleboardDates: 1978Container: Box 1
-
Description: Glenn Schroeder. Relationships Between Specific Gravity, Hardness, Modulus of Elasticity, and Modulus of Rupture in Clear Douglas-firDates: 1971Container: Box 1
-
Description: Randall Scott. Predicting Plywood Strength and Stiffness from Veneer Strength and StiffnessDates: 1970Container: Box 1
-
Description: Michael K. Seeds. A Comparison of Modulus of Rupture, Modulus of Elasticity, Shear Strength, and Percent Wood Failure of Three Different Types of One-Half Inch Exterior-Grade Douglas-fir PlywoodDates: 1975Container: Box 1
-
Description: Thomas H. Sheffield. An Experiment to Examine the Effect of Freezing Temperatures on the Bending Properties of Solid WoodDates: 1979Container: Box 1
-
Description: Tom Shuford. Effect of Resin Impregnated Lead Holes on Direct Screw Withdrawal Resistance
Includes 3 b/w prints
Dates: 1970Container: Box 1 -
Description: Michael A. Sigman. Particleboard Properties as a Function of Location Within a Hot PressDates: 1978Container: Box 1
-
Description: Ray Slaughter. Evaluating the Effect of Drying Temperature of Rotary-Cut Veneers on Modulus of Rupture and Modulus of Elasticity of 3/8" Douglas-Fir PlywoodDates: 1971Container: Box 1
-
Description: Harry R. Sondag. A Comparison of Two Methods of Accelerated Aging of Particle Board by Means of Modulus of RuptureDates: 1971Container: Box 1
-
Description: Robert Neal Stephen. Comparison of Bending Strength, Stiffness and Internal Bond Strength for Two Types of Structural and One Industrial-Grade ParticleboardDates: 1975Container: Box 1
-
Description: John W. Stermer. The Determination of True Modulus of Elasticity of Douglas-fir and Coast Hemlock 2x6'sDates: 1979Container: Box 1
-
Description: Glenn Schroeder. Derivations DesignDates: 1973Container: Box 1
-
Description: George R. Tietze. Effect of Stress Level of the Creep of Three Types of Composite BoardsDates: 1979Container: Box 2
-
Description: Larry C. Tinker. Prediction of Modulus of Rupture and Modulus of Elasticity of Small Clear Specimens from Properties of Increment CoresDates: 1974Container: Box 2
-
Description: Charles R. Turner. Correlation of Circular Saw Power Requirements with Wood Specific Gravity Variations and Saw Feed RateDates: 1976Container: Box 2
-
Description: David Underriner. Specific Gravity, Ring Count, and Percent Summerwood as Indicators of Strength in Douglas-firDates: 1979Container: Box 2
-
Description: James S. Vahrenwald. Analysis of Visual Strength Ratio, Actual Strength Ratio, Specific Gravity and Modulus of Elasticity as Predictors of Modulus of RuptureDates: 1976Container: Box 2
-
Description: Cle Wade. The Effect of Starch and Refining Time on Tensile Stretch, Tensile Energy Absorption, Bursting Strength and MOE in Bending of PaperDates: 1975Container: Box 2
-
Description: Brian A. Wagner. Thickness, Density and Machine Direction and Their Effects on Bending PropertiesDates: 1977Container: Box 2
-
Description: Tim Wall. Effect of Span Width, and Method of Loading on Modulus of Elasticity of PlywoodDates: 1973Container: Box 2
-
Description: Mark Watson. The Effect of Stress Level and Thickness Upon the Creep Properties of Particleboard From Two Different SourcesDates: 1978Container: Box 2
-
Description: Andrew F. Winkle. The Effect of Incising on Modulus of Rupture and Modulus of Elasticity of Douglas-firDates: 1971Container: Box 2
-
Description: Walter M. Wirfs. Effect of Impact on Modulus of Rupture and Modulus of Elasticity of Urea-formaldehyde Bonded Douglas-Fir Particle BoardDates: 1973Container: Box 2
-
-
Series II: Reference Materials, 1937-1976
Contains correspondence, research data, reports, testing equipment manuals and related documentation pertaining to forest products. The bulk of the items in this series are related documentation and testing equipment manuals.
-
Description: Bark, Volume, and Specific Gravities (Lodewick)
Correspondence
Dates: 1957Container: Box 2 -
Description: Bark Specific Gravity and Moisture Content
Correspondence
Dates: 1951Container: Box 2 -
Description: Barometer
Related Documentation
Dates: 1937-1959Container: Box 2 -
Description: Connectors
Research Data
Dates: undatedContainer: Box 2 -
Description: Combustion of Wood
Related Documentation
Dates: 1958-1962Container: Box 2 -
Description: Chips-Springfield Survey 20c
Report
Dates: 1954Container: Box 2 -
Description: CO2 vs. XSAIR and Stack Temp VSXS
Related Documentation
Dates: 1956Container: Box 2 -
Description: Corrosion and Deterioration of Wood in Contact with Iron Plus Other Corrosion
Research Data
Dates: 1962-1964Container: Box 2 -
Description: Deflectometer – Test Mach. Specs.
Related Documentation
Dates: undatedContainer: Box 2 -
Description: DIAPH. Test Apparatus 45KI, Redesign of
Research Data
Dates: 1960Container: Box 2 -
Description: ERROTC in DEFL. RDGS when Using 8” x 6 ½” WF Beam in Test Machine and New 15” Deep I-Beam
Research Data
Dates: 1966Container: Box 2 -
Description: High-Temp. Veneer Drying Apparatus
Research Data
Dates: 1966Container: Box 2 -
Description: Floor Test Apparatus
Research Data
Dates: 1963Container: Box 2 -
Description: Shrinkage Measurement Apparatus
Research Data
Dates: 1963Container: Box 2 -
Description: Cap Test Mold
Research Data
Dates: 1959Container: Box 2 -
Description: Diaphragm Test Apparatus
Research Data
Dates: 1960Container: Box 2 -
Description: Heat Pump
Related Documentation
Dates: 1948-1960Container: Box 2 -
Description: Ignition, Charring Temp., Wood
Correspondence
Dates: 1949-1967Container: Box 2 -
Description: Impregnator
Research Data
Dates: 1952Container: Box 2 -
Description: 5/4 and 4/4 Joists
Research Data
Dates: 1962Container: Box 2 -
Description: Log Scale vs. FT3, Vol. of Stumps
Related Documentation
Dates: 1953Container: Box 2 -
Description: ALTEC – Microphone
Testing Equipment Manual
Dates: 1954-1959Container: Box 2 -
Description: MOE Calc. From Slope – 60,000 Test Mach.
Related Documentation
Dates: undatedContainer: Box 2 -
Description: Reeves Drives
Testing Equipment Manual
Dates: 1951Container: Box 2 -
Description: Roots Blower
Testing Equipment Manual
Dates: 1948Container: Box 2 -
Description: Sanborn Recorder Schaevitz, Gages etc
Testing Equipment Manual
Dates: 1963-1965Container: Box 2 -
Description: Sanborn Recorder Manual
Testing Equipment Manual
Dates: 1962-1964Container: Box 2 -
Description: Shrinkage, Swelling
Related Documentation
Dates: undatedContainer: Box 2 -
Description: Steel Strength Variation
Related Documentation
Dates: 1954Container: Box 2 -
Description: Steel-Wood Joist-Stud, Cost Compare
Related Documentation
Dates: 1972Container: Box 2 -
Description: Strain Gages
Testing Equipment Manual
Dates: 1960-1961Container: Box 2 -
Description: Temp. Meas. Instr.
Testing Equipment Manual
Dates: 1949-1964Container: Box 2 -
Description: Test Grips (Two Different Sets)
Research Data
Dates: 1964-1965Container: Box 2 -
Description: Temp. Recorder Specs, GE-Also Range Change Kit
Testing Equipment Manual
Dates: 1959-1967Container: Box 2 -
Description: Thermal Expansion of Wood
Related Documentation
Dates: 1960Container: Box 2 -
Description: Thermal Properties of Wood (List of Duplications) USFPL
Related Documentation
Dates: 1961Container: Box 2 -
Description: Temperature Measurement
Related Documentation
Dates: 1948-1951Container: Box 2 -
Description: Veneer – Heated
Related Documentation
Dates: 1960Container: Box 2 -
Description: Vibration Insulators and Vibrators
Related Documentation
Dates: 1954-1960Container: Box 2 -
Description: Floor Vibration Meas.
Testing Equipment Manual
Dates: 1969-1974Container: Box 2 -
Description: Weighing Devices
Test Equipment Manual
Dates: 1951-1952Container: Box 2 -
Description: Wood, Slabs, Cubic Vol. Rel., Also Bark on Slab
Related Documentation
Dates: 1954Container: Box 2 -
Description: INSTRON – Inst. Manuals
Testing Equipment Manual
Dates: 1964-1971Container: Box 2 -
Description: INSTRON – New Machines
Testing Equipment Manual
Dates: 1976Container: Box 2
-
Names and SubjectsReturn to Top
Subject Terms
- Forest products--Oregon.
- Forestry laboratories--Oregon--Corvallis.
- Forestry schools and education--Curricula--Oregon--Corvallis.
- Lumber--Drying.
- Veneers and veneering.
- Wood--Mechanical properties.
- Wood--Testing.
- Wood--Thermal properties.
Other Creators
-
Corporate Names
- Oregon Forest Products Laboratory. (creator)
- Oregon State University. Dept. of Forest Products. (creator)
- Oregon State University. Forest Research Laboratory. (creator)
Loading...
Loading...
